Product Information
UJF-3042FX
- Liên hệ để biết giá
Direct printing of variable data on everything UJF-3042FX ensures that you can respond to your clients requirements for single or short run digital printing enhancing a multitude of products (including molded items), substrates and media up to 50 mm thickness with personalised messages.   |
| UJF-3042FX | ||
|---|---|---|
| Head | On-demand Piezo head | |
| Print resolution | 720 × 600 dpi, 1,440 × 1200 dpi | |
| Ink | Hard UV curable ink : LH-100, LF-140, LF-200 | |
| Ink capacity | 220 ml / cartridge | |
| Maximum print width | Width : 300 mm (11.8 "), Length : 420 mm (16.5 ") | |
| Media | Width | Width : 364 mm (14.3 "), Length : 463 mm (18.2 ") |
| Thickness | Max. 50 mm (1.97 ") | |
| Weight | Less than 5 kg (11 lbs) | |
| Set device | Air suction by vacuum | |
| UV device | Equipped with UV Light Emitting Diodes | |
| Interface | USB 2.0 | |
| Applicable standard | VCCI class A, FCC class A, UL, RoHS Directive, CE Marking | |
| Power specifications | AC 100 - 240 V (Automated voltage conversion) | |
| Power consumption | Less than 350 VA | |
| Operational environment | Temperature | 20 - 35 °C (68 - 95 °F) |
| Humidity | 35 - 65 % Rh | |
| Dust | Equivalent to normal office level | |
| Weight | Approx. 113kg (249.1 lbs.) | |
| Dimensions (W x D x H) | 1,200 mm x 1,090 mm x 770 mm (47.2 " x 42.9 " x 30.3 ") | |
*Inks would not be cured when printing speed is faster than that of draft mode.
- All trademarks or registered trademarks are the property of their respective owners.
- Specifications are subject to change without notice.
- Some of the screens and printing samples in this website are artificial renderings.
- Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.
·Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
·Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.
You are dealing with UV light sources that may harm your health.
Please follow below guidelines strictly:
・Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
・Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
・ In addition, please read the instructions and guidelines of the manual carefully and follow those.
UV LED curing technology
As UV LED does not generate excessive heat,
printing on heat-sensitive material becomes possible.
Simultaneous white ink under and overprint
Print outstandingly colorful, bright images on transparent and colored substrates with white ink under or overprint that do not slow down print speed.
UV-Curable ink
Staggered Print Head Arrangement
Fast and accurate printing with new print heads that accommodate full color and white in two lines thus doubling print speed.
*For SP, enable to insert White or Clear ink
Reverse print functionality
Select the order of overand underprint with white in RasterLinkPro5 (included standard RIP software) and the most efficient path is determined by the software.
Experience efficient high productivity without further operator intervention.
White over and underprinting
Without white ink as a basis for overprinting, the colors are not as vivid as they could be.
With the white ink overlay print, the image is bright and vivid.
Add value with layered finishes
Offer higher value prints to your customers:
Different layer printing enabling haptic surfaces will impress your clients.
Ink mist absorption filter
UJF-3042FX is equipped with Ink mist absorption filter for higher print reliability, consistency and quality.
Head gap should be 1.5mm maximum of our recommendation.
For wider, please test in advance as print quality decreases when gap is wider.
Environmentally friendly technology: UV LED curing technology
UV LED offers decisive energy savings, longer diode lifetime and a close to no VOC* emitting printing environment.
* VOC = Volatile Organic Compounds
Compact & easy introduction
UJF-3042FX is the most affordable flatbed tabletop printer that is just the right size to be placed into any office.
.png)
