Product Information

UJF-7151 plus

  • Liên hệ để biết giá

 

High Quality & High Performance

  • Mechanical structure for high-precision printing
    ・Unlike conventional models, a print table moves during printing for reducing printer unit vibration.
    ・Two ball screws are installed on both sides of the table to facilitate its movement.
     
  • Mimaki’s superior print-image quality control technology
    ・Mimaki Advanced-pass system 4 (MAPS4) reduces banding and uneven color printing.
    ・Mimaki Fine Diffusion 1 (MFD1), a patented dithering technique, is incorporated in the Mimaki RIP RasterLink 6 software.

UJF-7151 plus

  • Maximum 3.3m2/h productivity*
    ・Maximum printing speed. By reaching approximately twice the speed of previous models, it achieves approximately 2.6 times the productivity of competing printers in its class.
    ・The print area expands to 710 × 510 mm (28 × 20 in), enabling printing of size 636 × 469 mm (25 × 18.5 in); which is often used for screen printing.
     
  • Uninterrupted printing solutions
    ・Realizes high-stability printing through an ink-circulating mechanism within the head.
    ・”NCU” automatically detects missing jets for cleaning. When cleaning fails, “NRS” automatically sets a replacement nozzle and restarts printing. This minimizes the loss of raw materials due to missing jets and automatically continues production at high quality.

*Print conditions:600 × 600 dpi; 8 Pass


 
UJF-7151 plus

Production Example of UJF-7151 plus


*Click to view larger image.

UJF-7151 plus: 3D lenticular   UJF-7151 plus: Nameplate (Full-color)   UJF-7151 plus: Nameplate (Etching)   UJF-7151 plus: Card
3D lenticular   Nameplate (Full-color)   Nameplate (Etching)   Card
 
UJF-7151 plus: Membrane switch   UJF-7151 plus: Photo album   UJF-7151 plus: Wedding board   UJF-7151 plus: Gift & novelty
Membrane switch   Photo album   Wedding board   Gift & novelty

Model

UJF-7151 plus Maximum print area: 710 x 510 mm (28 x 20")

Corresponding Ink

LH-100

LH-100

PR200

PR200

Application list

  • Industrial Print
  • Package
 

Specifications

UJF-7151 plus
Printhead On-demand piezo head (6 staggered printheads)
Maximum print resolution 1,200 dpi
Maximum printable area 710 × 510 mm (28 × 20 in)
Ink Type/Color LH-100 (C, M, Y, K, W, Cl)
PR-200 (Primer)
LUS-120 (C, M, Y, K, W) *
Package size 1L bottle
Media Size 730 × 530 mm (28.7 × 20.9 in) or smaller
Height 153 mm (6 in) or less
Weight 10 kg (22 lb) or less
Certifications VCCI class A, FCC class A, ETL UL 60950-1
CE Marking (EMC, Low voltage, Machinery directive, and RoHS), 
CB, REACH, Energy Star
Interface USB 2.0 Hi-speed / Ethernet 1000BASE-T
Power supply Single-phase AC100 – 120V / AC200 – 240V
Power consumption 1.3kW
Operational environment Temperature: 15 – 30 °C (59 - 86 °F)
Humidity: 35 – 65% Rh (Non condensing)
Recommended temperature range for stable operation: 20 – 25 °C (68 - 77 °F)
Dimensions (W × D × H) 2,198 × 1,572 × 1,273 mm
Weight 317 kg (Base stand weight is included)

* LUS-120 ink will be available in the future.
・Inks would not be cured when printing speed is faster than that of draft mode.

  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of their respective owners.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

 


 

 Inks and substrates:

  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

 


 

 Safety notice:

You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

Mechanical structure achieves high-precision printing

To improve precision, modifications applied are as follows. 
To reduce printer unit vibration, the print table moves during printing instead of the Y-bar. Two ball screws are installed on both sides of the table to assist with its movement. In addition, four motor-driven legs are added beneath the table to maintain horizontality when the table is lifted or lowered.


High precision drop landing

High precision drop landing


Mimaki’s print technologies for achieving beautiful printing


Mimaki Advanced pass System 4 (MAPS4)

Generally, swath boundaries are straight lines. Therefore, a slight misalignment between boundaries causes banding or uneven color printing. MAPS4 reduces banding and uneven color printing with blurred boundaries similar to gradation printing.


MAPS4 applied

■MAPS4 applied
Banding and uneven color printing are reduced by scattering swath boundaries. Beautiful print image is obtained.



No MAPS4

■No MAPS4
Bandings appear on swath boundaries. Print quality is remarkably degraded because banding is recognizable on each boundary.


MFD1—Mimaki Fine Diffusion 1


MFD1—Mimaki Fine Diffusion 1

Dithering is an image processing technique, which transforms image data for inkjet printing. Pattern and error-diffusion dithering may, however, generate particular image noise resulting in uneven color printing or tone jumps, even on a high-performance printing unit. 
The newly developed RasterLink 6 software,*1 incorporating the patented*2 image-processing MFD1, reduces noises due to dithering through hybrid processing of pattern- and error-diffusion dithering, thereby enhancing printing quality. 
*1 MFD1 is available for Version 4.0 and higher
*2 Patent number: 5230816


Maximum 3.3m2/h* productivity


An array of six staggered printheads increases the printing speed and achieves top-level productivity in the same product category. The UJF-7151 plus supports effective production through high-speed printing at approximately twice the speed of previous models and approximately 2.6 times that of competitive models. Furthermore, by expanding the print area to 710 × 510 mm (28 × 20 in), it is possible to print at the size of 636 × 469 mm (25 × 18.5 in), which is often used for screen printing.
*Print conditions:600 × 600 dpi; 8 Pass


print area to 710 × 510 mm (28 × 20 in)

Reliable operating support package


Ink and media shortage, clogged nozzles, and other minor problems influence stable productivity. 
The UJF-7151 plus fully supports continuous printing with reliable technologies.

New printhead’s ink-circulation system reduces clogging nozzles

The ink-circulation system in the head reduces ink settling and thus provides stable ink jetting. In addition, this system removes air bubbles, which plug the nozzle.. Thanks to this function, the nozzle-cleaning frequency is reduced, and accordingly, cost-effective stable printing is achieved.


Head Comparison

Head Comparison


Self-recovery

Self-recovery


NCU automatically detects and recovers clogged nozzles

Clogged nozzles are detected automatically by monitoring ink droplets with sensors. When clogged nozzles are located, these are automatically cleaned, reducing waste printing. Nozzles are checked per transfer file.

NRS for maintaining productivity

If the clogged nozzles are not recovered after cleaning through the NCU function, the NRS selects substitute nozzles and then restarts printing. This is a significant novelty, since previously, when nozzle cleaning fails, the printhead has to be repaired by a technician, and the printing operation ceases until the printhead is repaired. The NRS* allows the printer to continue printing without interruption by using non-defective nozzles as substitutes for defective nozzles until the technician arrives.*
*NRS may not be activated depending on print modes.


NCU, NRS

*Click to view larger image.

 

 


 

 

UJF-7151 plus